Mmi Application: Grinding
9.3 Power Max Ceramic with Grinding Aid
Our highest performing disc for stainless and high alloyed steels 100% ceramic abrasive grain for exceptional grinding performance Special grinding aids for reduced heat and loading and allows for cool cutting under the most demanding applications Available in Bulk or Sait-lok™ Packaging Bulk Spindle Packaging: Assures that each disc remains perfectly flat. The unique design offers the convenience of easy access and can be retightened to ensure that your discs are flat when you need them. (Note: Part Numbers 58225, 58227, 58228 are 50 pieces per spindle)
6″ Length Shank Double Cut (Non-ferrous) Carbide Burs
More open, aggressive cut to avoid loading on softer materialsEasy chip flow with little or no cloggingProvides outstanding stock removal on aluminum, magnesium, copper, soft steel, brass, zinc alloys, hard rubber, most plastics, and non-ferrous metals.Excellent for confined or hard-to-reach areasUse for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
6″ Length Shank Double Cut Carbide Burs
Provides smooth operation and maximum tool controlDouble cut (Alternate cut) is the most popular bur in ferrous applicationsManufactured with cuts made on the left and right spirals to produce a finer finish on material resulting in smaller chips and sliversExcellent for confined or hard-to-reach areasUse for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
4″ Length Shank Single Cut (Non-ferrous) Carbide Burs
More open, aggressive cut to avoid loading on softer materialsEasy chip flow with little or no cloggingProvides outstanding stock removal on aluminum, magnesium, copper, soft steel, brass, zinc alloys, hard rubber, most plastics, and non-ferrous metals.Excellent for confined or hard-to-reach areasUse for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
4″ Length Shank Double Cut Carbide Burs
Provides smooth operation and maximum tool controlDouble cut (Alternate cut) is the most popular bur in ferrous applicationsManufactured with cuts made on the left and right spirals to produce a finer finish on material resulting in smaller chips and sliversExcellent for confined or hard-to-reach areasUse for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Saitron® Silicon Carbide – Type 29
This disc features a durable fiberglass backing with abrasive grains bonded with high-strength synthetic resins. This combination provides exceptional stability and powerful abrasive performance, ensuring high material removal and long life. Suitable for aggressive grinding on stone, manufactured aggregates, non-ferrous alloys and fiberglass.
Saitron® Aluminum Oxide – Type 29
This disc features a durable fiberglass backing with abrasive grains bonded with high-strength synthetic resins. This combination provides exceptional stability and powerful abrasive performance, ensuring high material removal and long life. Suitable for aggressive grinding of carbon steel, mill scale, cast iron, aluminum, non-ferrous metals and wood.
7.3 Power Max Ceramic
Our highest performing disc for carbon steel Maximum durability and effectiveness NEW 3-dimensional ceramic grain for maximum performance and efficiency For use on Metal and Stainless
Portable Belts
Economy aluminum oxide, closed coatX-weight cotton backingFor low cost sanding and finishing of ordinary and alloyed steels, ferrous and non ferrous metals, cast iron and woodA good choice where price and best value is the determining factorEach package of belts is shrink-wrapped in quantities of 10
Backstand Belts
Semi-friable (1A-X) / heat treated (2A-X) aluminum oxide grain X-weight cotton backing For general purpose grinding and finishing Each package of belts is shrink-wrapped in quantities of 10
Benchstand Belts
Semi-friable (1A-X) / heat treated (2A-X) aluminum oxide grainX-weight cotton backingFor general purpose grinding and finishingEach package of belts is shrink-wrapped in quantities of 10
Z-H Zirconium
High performance zirconium grain Extremely fast stock removal and long life Triple laminated construction for severe pressure applications where conventional laminated discs have too much flex Excellent for edge grinding, deburring, and weld preparation and removal
2A-H Aluminum Oxide
Aluminum oxide grain Fast stock removal Excellent edge grain retention Triple laminated construction for severe pressure applications where conventional laminated discs have too much flex Excellent for edge grinding, deburring, and weld preparation and removal
9S – Ceramic Aluminum Oxide with Grinding Aid
Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.) with an exceptional performance and value High performance, ceramic aluminum oxide grain Grinding aids for reduced heat and decreased loading Easy disc changes by twisting to unlock backing pad Features unique composite Sait-Lok™ hub for added strength
3Z – Zirconium with Grinding Aid
Premium zirconium grain with grinding aid Cooling agents for cool cutting and long life Very fast stock removal, no discoloration Easy disc changes by twisting to unlock backing pad
Subscribe
Get product news and tips straight to your inbox